Freescale/NXP MPC5606B: LED Toggle Program

In this program, LED1 on TRK-MPC5606B board Toggles after some delay.

Delay is generated using "for" loop only which is not the recommended way. (Delay in this program is not accurate delay.)



Problem Statement:To Toggle the LED1 from TRK-MPC5606B board.




Connections:

                                  (144-pin LQFP package)
LED No. => Port No. => Pad No. => Pin No.
LED1    => PE[4]    => PCR[68] => PIN 132
LED2    => PE[5]    => PCR[69] => PIN 133
LED3    => PE[6]    => PCR[70] => PIN 139
LED4    => PE[7]    => PCR[71] => PIN 140

To change the time for which LED1 should be  ON and OFF, Change the constant value from if condition

/***************************************/
 if(i>1000000)
/***************************************/

Downloads:

LED1_Toggle_TRK-MPC5606B_APDaga

Click here to see more codes for Freescale/NXP MPC56xx Family.

Feel free to ask doubts in the comment section. I will try my best to solve it.
If you find this helpful by any mean like, comment and share the post.
This is the simplest way to encourage me to keep doing such work.

Thanks and Regards,
-Akshay P. Daga